Pack Selector
Fill in the Project Name, Manifold Location and the Room Name, Floor Area (m²) and the Distance from Manifold for each of the heated rooms.
Once this is complete, please click the red button marked Calculate.
The pack code for your installation will appear below the table.
Take the pack code to your local independent merchant who will give you a price and order the materials if you wish to proceed.
If you would like a Sales Manager to contact you to discuss your project, fill in your contact details and click the green button marked Contact.
The Pack Selector below will select the correct Pro Underfloor Pack for your screed floor installation.
Do you want a sales rep to contact you?
Pack Selection
1. The maximum output that can be achieved is 100W/m2. In a poorly insulated building, or an area where there is an unusually high amount of glazing, such as a conservatory, additional heating may be required during mid winter conditions. For further information on this subject see the section Heat Outputs within the section About UFH.
2. Due to the reduced floor area and increased ventilation rate, within a bathroom or an en suite we recommend supplementing the heat with a thermostatically controlled towel rail. The UFH within a bathrooms or an en suite should be controlled with the nearest adjacent zone. For example, an en suite should be controlled with its corresponding bedroom and a bathroom should be controlled with the hall or landing.
3. Insulation is to comply with Part L of the Building Regulations. Ideally the floor covering will have a combined resistance of less than 1.0 tog. For further information on these subjects see the section Floor Coverings and Insulation within the section About UFH.
4. All wiring is to be carried out by a competent electrician in accordance with IEE regulations.
